 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
| a) | Equipped with four adjustable-speed hot rollers (Φ80mm)
per spindle. POY and FDY of continuous synthetic fibers such as nylon and polyester can be supplied. Orientation by the hot roller is utilized, allowing for stable orientation of thicker raw yarn than that produced with the shaft driving system. |
 |
|
| b) | Orientation with the hot roller allows the yarn produced to have very little shrinkage in boiling water. |
|
|
| c) | ATY loop can be adjusted with the second heater. |
|
|
| d) | All processing conditions are determined by PLC. Setting can be carried out with either the touch panel or a PC. |
|
|
| e) | Synchronous control of all the spindles allows for better cost efficiency per spindle when employing the hot roller system. |
|
|
| f) | Winding size is 10 inches (250mm). |
|
|
| g) | The maximum number of spindles is 48. Adding to it every 6 spindles (one block) is supported. |
|
|
| h) | Mainly suitable for the production of yarn for use in bags of 1,000dtex or less and as industrial material. |
